Carrier 38XTZ 007-024 Installation, Operation And Maintenance Instructions page 7

38XTZ 014
Outdoor air
discharge
Rear view
4 anchor and fixing
holes ø 12 mm
When designing an installation, always use up-to-date drawings, available from your local Carrier office.
Fig. 3 - Dimensions, mm
Outdoor air
discharge
Outdoor
Suction line
air inlet
connection 1-1/8"
Left-hand side view
Fans
Refrigerant-air heat exchanger
Outdoor
air inlet
Plan view
Main disconnect switch
Liquid line
connection 5/8"
Refrigerant line
connections
Profile view - unit base
4 lifting and transport
holes ø 16 mm
Control box
Compressor
access panel
Front view
Note:
Rain water is drained through
holes in the lower part of the
base under the outdoor unit
heat exchanger and the fans.
7