Carrier 38XTZ 007-024 Installation, Operation And Maintenance Instructions page 23

- Select a location free of dust or foreign matter which may
cause coil clogging.
- Leave sufficient clearance for free air circulation (outdoor
supply and return air).
- For minimum clearances between the units and walls or
roofs, see Fig. 20:
38XTZ 007 and 008
Return air
Supply
air
PLAN VIEW
ROOF
Supply
air
FLOOR
RIGHT SIDE VIEW
Table 5 - Minimum clearances (mm)
A B C
200 200 500
(*) Leave a minimum of 1 m clearance around the unit.
38XTZ 011, 016, 020 and 024
Return air
FLOOR
FRONT VIEW
Return air
Supply air
PLAN VIEW
Supply
air
FLOOR
RIGHT SIDE VIEW
Fig. 20
D E F (*)
200 2000 5000 (*)
Return air
Return air
PLAN VIEW
ROOF
Supply air
Control box
Access panel
Fig. 21
Table 6 - Minimum clearances (mm)
A B
500 500
(*) Leave a minimum of 1 m clearance around the unit.
38XTZ 014
Return air
FLOOR
Table 7 - Minimum clearances (mm)
A B
500 1000
(*) Leave a minimum of 1 m clearance around the unit.
- If several units are installed close to each other in the same
area, ensure the minimum clearance between them to
allow free air flow.
38XTZ 007 and 008
Return air
Return air
Supply air
Return air
Return
air
Supply air
NO
PLAN VIEW
VISTA EN PLANTA
C D (*)
1000 Free (*)
PLAN VIEW
ROOF
Supply air
Control
box
Access
panel
FRONT VIEW
Fig. 22
C D (*)
500 Free (*)
Return air
Supply air
Return air
Supply air
OK
Fig. 23
23