Installationrequirements - Samsung WB09H7 Series User Manual

Hide thumbs Also See for WB09H7 Series:
Table of Contents

Advertisement

Available languages

Available languages

Accessories
The water supply hose and the drain hose (extensionhose) can be purchased at a local Samsung
servicecenter.
Watersupply hose
Drain hose
Short inlet hose (2) "Y"-connector (2)
Hose guide
(2)
%d
i
J
i
Drain adaptor
Baffleboard
Levelingdevice
Screw
Clamper
Rubber washer (2)
User manual
Tap connector
Installation requirements
Water Supply
Tocorrectly fill your washer in the proper amount of time, water pressure of 20 to 116 psi (137
to 800 kPa)is required.Water pressure lessthan 20 psi may cause water valvefailure, may
not allow the water valveto shut off completely, or may extend the fill time beyond what your
washer controls allow, causing your washer to turn off. A time limit is built into the controls to
prevent flooding in your home if a hose becomes loose.
For the provided water hosesto reach the washer, make sure the water taps are within
120 cm (4 ft) of the back of the washer.
Before using for the first time, check all connections at the water valves and taps for any leaks.
To reduce a risk of water leaks:
Make sure the water taps are easily accessible.
Turn off the water taps when the washer is not in use.
z_
CAUTION: Check all connections at the water valves and taps for any leaks.
Englbh
o 8

Advertisement

Table of Contents
loading

Table of Contents