Step-By-Step Installation - Samsung WB09H7 Series User Manual

Step-by-step installation
Step 1 - Select a location
Location requirements. For the best performance:
• Installthe washer on a solidlyconstructed floor.
Never installthe washer on a platform or weakly supported structure.
Allow at least 4 in (10 cm) between the washer and the wall.
Do not expose the washer to direct sunlight or rain as moisture may damage the electrical
insulation, causing an electrical shock hazard.
Provide adequate ventilation.
Do not expose to temperatures below 32 °F or 0 °C.
Keep away from a heat sources.
Provide enough space so that the washer doesn't rest on its power cord.
Step 2 - Insert the baffle board
1. Lay the washer down on its side.
Do not laythe washer down on its front or back.
While laying the washer down, be careful not to scratch the
surface of the washer.
2. Insert the baffleboard into the bottom of the washer along the
guideline.
The baffle board can reduce noise whilethe washer operates.
Once the baffle board is installed, do not remove it unless
necessary.
English o 12