About The Sanitizingwash Cycle - Samsung WB09H7 Series User Manual

About the sanitizing wash cycle
The sanitizingwash cycle sanitizes clothes and helps removestains.
How can a sanitizing wash remove stains more effectively?
While the laundry is being sanitized, the laundry's fibres fold and naturallyrub each otherto
facilitate the removal of stubborn stains. Also, the high temperature helps soften the material
of the laundry,and enhances the performance of the detergent. Stains on the surface of
the laundryare easilyremoved by the steam and bubbles that are generated by the high
temperatures of the sanitizingwash cycle.
Sterilization
The sanitizingwash has a sterilizationeffect. Odors and most of the bacteria that cause skin
allergiesare removed by the sanitizing cycle. Keepsyour clothes fresh and clean.
Bleaching
Colors become brighter as stubborn stains are removed by the sanitizingcycle.
Washing effect
The higherthe water temperature, the better the washing effect.
The effects of a sanitizingwash cycle are 60% better than a normal wash. Evenwith a half of the
normal amount of detergent, the effects of a sanitizingwash increaseup to 20%
Sanitizing wash instructions
• Use caution during a sanitizingwash because the water temperature is very high.
Todrain the water safely, do not select a high water levelfor a sanitizingwash. Do not put more
than 1.5 kg (3 Ib)of laundryinto the tub. Ifyou put more than 3 lb. (1.5 kg) of laundry into the
tub, the clothes' fibers can be damaged. (Underwear:4.5 oz/130 g; short pants: 1.75 oz/50 g;
socks: 1.75 oz/50 g; normal towels: 5.25 oz/150 g; bath towels: 10.5 oz/300 g)
Do not supply hot water through the cold water valve. Operate the washer only after the cold
water valve is closed. For safety reasons,add cold water to cool down the hot water while
draining.
Time requiredto run the sanitizing wash cycle depends on the water temperature.
The washer is designed for a sanitizing wash. Add only cold water to the hot water to cool it
down when the cycle is complete.
If only hot water is supplied, or the water hoses are connected incorrectly (hot to cold and cold
to hot), the washer won't drain the water. If this occurs, an alarm will sound and the washer will
display an error code.
The sanitizingwash cycle starts only when the door is closed.
Once the cycle starts, the water levelcannot be changed nor can hot water be added.
English o 25