14 Receiving measurements automatically
Once batteries are installed, the base station will display the indoor temperature readings. Readings
from the remote sensor will be displayed within 3 minutes after powering it on.
Read the detailed manual for more information about readings (see download information on page 2).
15 Manual measurement display
1. Press UP button several times to display the saved values one after another.
2. Display order: Current values > MAX (highest values) > MIN (lowest values)
3. Press UP button for approx. 2 seconds during highest or lowest value display to irrevocable delete
all saved values.
NOTICE! Saved highest and lowest values will be deleted automatically every day on 0:00!
16 Weather trend display
The weather station will calculate a weather trend for the next 12 hours on basis of the measured val-
ues. It will be displayed as follows:
1
Illustration 3: Weather trend indicators
1 Sunny
3 Cloudy
17 Connecting remote sensors
The measurements of up to 3 remote sensors* of the same type can be displayed on the weather sta-
tion's screen.
1. Remove the battery compartment cover from the remote sensor.
2. Press the CH button repeatedly until the desired channel is shown on the sensor display (CH1,
CH2 or CH3).
3. Re-attach the battery compartment cover.
4. Press the CH button on the base station repeatedly to display the measurements of the different
channels. The selected channel is shown on the display.
*one remote sensor included, more optionally available
18 Disposal
Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
Do not dispose of electronic devices in the household garbage!
Manual_7007600000000_Translucidus_en_BRESSER_v1216
2
3
2 Partly cloudy
4 Rain
Imprint | 14
4
9 / 10
Need help?
Do you have a question about the Translucidus and is the answer not in the manual?