Manual Time Setting; Alarm Setting; Snooze Function; Temperature Alarm Setting - Bresser Translucidus Instruction Manual

10 | Imprint
Read the detailed manual for more information about manual time and alarm setting (see download in-
formation on page 2).

10 Manual time setting

1. Press and hold SET button for approx. 2 seconds to change to time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press SET button to confirm and continue to the next setting.
5. Settings order: Year > Month > Day > Time zone > 12/24-hour mode > Hours > Minutes
6. Finally press the SET button to save the settings and exit the setting mode.

11 Alarm setting

1. Press and hold ALARM button for approx. 2 seconds to change to alarm time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press ALARM button to confirm and continue to the next setting.
5. Settings order: Hours > Minutes
6. Finally press the ALARM button to save the settings and exit the setting mode.
7. Press SET button to activate the alarm. The symbol will be displayed. The alarm is activated.
8. Press SET button again to disable the alarm. The symbol will not be displayed. The alarm is dis-
abled.

12 Snooze function

1. When the alarm sounds, press SNZ button to activate the snooze function. The alarm will sound
again in 5 minutes.
2. Press any other button when the alarm sounds to interrupt the alarm until the alarm time will be
reached again.

13 Temperature alarm setting

1. In normal time display mode, press DOWN button for approx. 2 seconds to enter temperature
alarm time setting mode.
2. Digits to be set are flashing.
3. Settings order: ON/OFF (Temperature alarm on/off) > Temperature highest limit > Temperature
lowest limit > Exit
4. Press UP or DOWN button to change the value.
5. Press SET button to confirm and continue to the next setting.
6. The temperature settings mode will be quit automatically after 30 seconds of inactivity. All settings
done before will be saved.
7. When outdoor temperature reaches highest or lowest limit, the temperature alarm symbol will flash
and an alarm will sound for approx. 3 seonds. This will be repeated with an interval of 1 minute un-
til the temperature has fallen below the limit again.
8. NOTICE! Select temperature alarm OFF from the temperature settings mode to disabled the
temperature alarm permanently.
8 / 10 Manual_7007600000000_Translucidus_en_BRESSER_v1216