CORDING FOOT: SP-750438007
This special sewing foot is used for sewing a cording tape between two layers of fabric in one
operation.
Preparing the machine
Differential feed setting:
Stitch length:
Needle:
Thread tension:
1. Raise the sewing foot.
2. Set needle at its higest position.
3. Place bottom layer (1) cording tape (2) and top layer (3) (face side to face side) together under
the sewing foot flush, and insert up to the upper knife.
4. The cording (piping) must be placed in guide (4).
5. Lower the sewing foot.
6. Make a sewing test.
Set at "N" position
3 to 4
Two needles or left one
Standard setting
1
- 28 -
4
3
2