Audio Settings; Tone Adjustment (Bass/Treble) - Fiat Panda Owner's Handbook Manual

When the volume level is changed using the
dedicated controls, the Mute function is deactivated
and the volume is adjusted to the new level selected.
With the Mute function activated, it will be ignored
when there is an incoming traffic alert (if the TA
function is activated), or if an emergency alarm is
received. The function will be reactivated when the
alert is over.

AUDIO SETTINGS

The functions in the audio menu differ according to
the active source: AM/FM/CD/Media Player (only
with Blue&Me™) /AUX (only with Blue&Me™,
for versions/markets, where provided).
Press the button briefly to change the Audio
functions.
After the button is first pressed, the display will
show the bass level value for the source activated at
that time (e.g. in FM mode the display will show the
wording "FM Bass +2").
Use the or
functions. To change the setting of the function
selected use the
of the selected function appears on the display.
The functions managed by the Menu are:
❒ BASS (adjustment of bass tones);
❒ TREBLE (adjustment of high tones);
❒ BALANCE (right/left balance adjustment);
❒ FADER (front/back balance adjustment);
218
buttons to scroll through the menu
or buttons. The current status
❒ LOUDNESS (LOUDNESS function
activation/deactivation);
❒ EQUALISER (activation and selection of factory-
set equaliser levels);
❒ USER EQUALISER (customised equaliser setting).

TONE ADJUSTMENT (bass/treble)

Proceed as follows:
❒ Use
or buttons to set the "Bass" or "Treble"
in the AUDIO menu;
❒ press the
or button to increase/decrease the
bass or treble.
By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.