Fiat Panda Owner's Handbook Manual page 18

interval (in kilometres or miles) before the next
engine oil change is due.
GETTING TO
KNOW YOUR CAR
To consult this information, proceed as follows:
❒ briefly press the
show the service interval in kilometres (km) or
miles (mi) according to the previous setting (see
SAFETY
"Distance measurement units" paragraph);
❒ press the
screen or hold it down to return to the standard
STARTING AND
screen.
DRIVING
Note The "Scheduled Servicing Plan" requires the
car to be serviced every 30,000 km (or 18,000 miles)
WARNING LIGHTS
for petrol versions and every 35,000 km (or 21,000
AND MESSAGES
miles) for diesel versions. This message is displayed
automatically when the key is turned to MAR,
starting at 2,000 km (or equivalent value in miles)
from when the next service is due and reappearing
IN AN EMERGENCY
every 200 km (or equivalent value in miles). Below
200 km servicing indications are more frequent. The
display will be in km or mi depending on the
measurement unit settings. When the next
SERVICING AND
scheduled service is approaching and the key is
MAINTENANCE
turned to MAR, the word "Service" will appear on
the display, followed by the number of kilometres or
miles left before servicing is due. Go to a Fiat
TECHNICAL
Dealership, where the "Scheduled Servicing Plan"
SPECIFICATIONS
operations will be performed and the message will
be reset.
INDEX
14
button, which makes the display
button briefly to return to the menu
Airbag/Passenger bag (Passenger side front
airbag and side bag (chest & pelvis protection
- for versions/markets, where provided)
activation/deactivation)
This function allows the passenger side airbag to be
activated/deactivated.
Proceed as follows:
❒ press the
button and, after the message "Bag
pass: Off" (to deactivate) or "Bag pass: On" (to
activate) is displayed by pressing buttons
, press the button again;
❒ a confirmation message will appear on the display;
❒ by pressing the
or
confirm activation/deactivation) or "No" (to
cancel);
❒ press the
button briefly; a message confirming
the selection is displayed and you return to the
menu screen. Hold down the button to return to
the standard screen without storing.
and
buttons select "Yes" (to