Selecting Cd Function; Audio Source Memory Function; Volume Adjustment; Mute/Pause Function - Fiat Panda Owner's Handbook Manual

SELECTING CD FUNCTION

By pressing the MEDIA button briefly it is possible to
select the CD function.

AUDIO SOURCE MEMORY FUNCTION

If another function (e.g. the radio) is selected whilst
listening to a CD, playback is interrupted and is
resumed from the same point when returning to the
CD source.
If another function is selected whilst listening to the
radio, the last station selected is tuned into when
returning to the Radio mode.

VOLUME ADJUSTMENT

Turn the (ON/OFF) button/knob to adjust the
volume.
If the volume level is changed during the transmission
of traffic news, the new setting will only be
maintained until the update is finished.

MUTE/PAUSE FUNCTION

(setting volume to zero)
Press the button briefly to activate the Mute
function. The volume will gradually decrease and the
words "RADIO Mute" will be displayed (in radio
mode) or "PAUSE" (in CD mode).
Press the button again to deactivate the Mute
function. The volume will gradually increase until it
reaches the level previously set.
When the volume level is changed using the
dedicated controls, the Mute function is deactivated
and the volume is adjusted to the new level selected.
With the Mute function activated, it will be ignored
when there is an incoming traffic alert (if the TA
function is activated), or if an emergency alarm is
received. The function will be reactivated when the
alert is over.

AUDIO SETTINGS

The functions in the audio menu differ according to
the active source: AM/FM/CD/Media Player (only
with Blue&Me™) /AUX (only with Blue&Me™,
for versions/markets, where provided).
Press the button briefly to change the Audio
functions.
After the button is first pressed, the display will
show the bass level value for the source activated at
that time (e.g. in FM mode the display will show the
wording "FM Bass +2").
Use the or buttons to scroll through the menu
functions. To change the setting of the function
selected use the or buttons. The current status
of the selected function appears on the display.
The functions managed by the Menu are:
❒ BASS (adjustment of bass tones);
❒ TREBLE (adjustment of high tones);
❒ BALANCE (right/left balance adjustment);
❒ FADER (front/back balance adjustment);
249