Fiat Panda Owner's Handbook Manual page 151

To change the bulb proceed as follows:
❒ slacken the two screws fig. 121 from their seats,
pull gently outwards until releasing the whole
headlight from the two clips (press-fitted D
fig. 121) and release the connector;
❒ undo the five screws B from their seats and
remove the bulb holder C fig. 122;
❒ remove the bulbs, pushing them slightly and
turning them anti-clockwise;
❒ refit the new lamp and carry out the procedure
described previously in reverse.
rd
3 BRAKE LIGHTS
These are located in the tailgate and are LED lights.
For replacement, contact a Fiat Dealership.
fig. 120
FOG LIGHT/REAR FOG LIGHT
To change the bulb, proceed as follows:
❒ adjust the tabs A and remove the flap B fig. 123;
❒ adjust the catch C and disconnect the electrical
connector D fig. 124;
fig. 121
F0W0069
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0W0310
147