Fiat Panda Owner's Handbook Manual page 140

❒ using the wrench provided, tighten the fastening
bolts;
GETTING TO KNOW
YOUR CAR
❒ lower the car and remove the jack;
❒ using the wrench provided, fully tighten the bolts
in the sequence shown previously.
SAFETY
Versions with alloy wheels
❒ insert the wheel on the hub and using the wrench
provided tighten the bolts;
STARTING AND
❒ lower the car and remove the jack;
DRIVING
❒ using the wrench provided, fully tighten the bolts
in the sequence shown;
WARNING LIGHTS
❒ reinstall the pressure-fitted hub cap, making sure
AND MESSAGES
that the reference hole on the wheel is aligned
with the reference hole on the cap.
IMPORTANT If it is not fitted properly, the hub cap
IN AN
may detach itself when the vehicle is running.
EMERGENCY
At the end of operation
❒ stow the space-saver wheel in the compartment
SERVICING AND
MAINTENANCE
provided in the luggage compartment;
❒ insert the jack and the other tools in the
container;
TECHNICAL
❒ arrange the container and tools on the space-saver
SPECIFICATIONS
wheel;
❒ correctly reposition the boot mat.
INDEX
136
"Fix&Go Automatic" kit
It is located in a special container in the luggage
compartment fig. 107. The container also contains a
screwdriver and the tow hook.
The kit fig. 107 contains:
❒ bottle A containing sealer and fitted with:
❒ filling pipe B;
❒ sticker C bearing the notice "max. 80 km/h", to be
placed in a position visible to the driver (on the
instrument panel) after fixing the tyre;
❒ a compressor D including a pressure gauge and
connections, found in the compartment;
❒ instruction brochure (see fig. 109), to be used for
prompt and correct use of the tyre quick repair
kit and then to be handed to the personnel
charged with handling the treated tyre;
fig. 107
F0W0093