Fiat Panda Owner's Handbook Manual page 154

❒ open the flap B fig. 128 and replace the bulbs C
releasing them from the side contacts. Make
GETTING TO KNOW
sure that the new bulbs are correctly secured
YOUR CAR
between the contacts;
❒ reclose the flap B fig. 128 and fix the roof light A
fig. 127 in its housing making sure that it is locked.
SAFETY
SINGLE-BULB INTERIOR ROOF LIGHTS
To change the bulbs, proceed as follows:
STARTING AND
❒ operate in the point shown by the arrow and
DRIVING
remove the roof light A fig. 129;
❒ open the flap C fig. 130 and replace the bulb B
releasing it from the side contacts;
WARNING LIGHTS
AND MESSAGES ❒ Insert the new bulb B fig. 130 and make sure that
it is correctly clamped between the contacts;
❒ reclose the flap C fig. 130 and fix the roof light A
IN AN
fig. 129 in its housing making sure that it is locked.
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
fig. 129
150
LUGGAGE COMPARTMENT ROOF LIGHT
To change the bulbs, proceed as follows:
❒ open the luggage compartment and extract the
roof light A fig. 131 working in the point shown
by the arrow;
❒ open the protection B and replace the bulb;
❒ re-close the protection B on the lens;
❒ refit the roof light A by inserting it in its correct
position firstly on one side and then pressing on
the other until it clicks into place.
fig. 130
F0W0237 F0W0235