RS LDC 2000 Rigging Manual page 28

14. If wind conditions allow. Position the boat so it points directly down
wind and hoist the spinnaker. Take care that the spinnaker does not
snag on the trolley. A second person can help with this. Pull the sail up
slowly. Do not force the sail if it becomes snagged, tangled or tight.
Once hoisted check the sheets are correctly routed around the front of
the jib and not tangled with the halyard.
15. To drop pull the slack out of the downhaul by pulling from behind the
block located at the rear of the sock. Un-cleat the halyard and slowly
pull the spinnaker into the spinnaker sock. A second person can help
gather the sail and prevent it snagging.
1. Fit the rudder assembly on to the
transom fittings.
2. Attach the rudder retaining split
ring to the top rudder Pintle.
3. Check the rudder retaining clip
has engaged correctly and
functions accordingly.
3.10 The Rudder
28