Gold's Gym GGBE60610.4 User Manual page 9

4. Attach the Front Leg (4) to the Frame (3) with
two M8 x 45mm Bolts (28), two M8 Washers
(10), and two M8 Locknuts (11). Make sure that
the Locknuts are in the indicated hexagonal
holes; do not tighten the Bolts yet.
5. Attach the Frame (3) to the Crossbar (2) with two
M10 x 68mm Bolts (27) and two M10 Locknuts
(31). Do not tighten the Locknuts yet.
6. Insert the Backrest Support (14) into one of the
three sets of holes in the Uprights (1). Rotate
the Backrest Support so that the locking pin
is wrapped around the Upright (see the inset
drawing).
See steps 2, 4, and 5. Tighten the M8 Locknuts
(11) and the M10 Locknuts (31) used in these
steps.
4
28 10
Hexagonal
Holes
4
5
6
14
Locking
Pin
Locking
Pin
9
3
11
27
2
3
31
1
1