Gold's Gym GGBE60610.4 User Manual page 10

7. Using a small plastic bag to keep your fingers
clean, apply part of the included grease packet to
an M10 x 60mm Bolt (25).
Attach the Leg Lever (6) to the Front Leg (4) with
the M10 x 60mm Bolt (25) and an M10 Locknut
(31). Do not overtighten the Locknut; the Leg
Lever must pivot easily.
8. Insert a Pad Tube (12) into the Leg Lever (6).
Next, slide a Foam Pad (13) onto each end of
the Pad Tube. Then, press a Pad Cap (5) into
each end of the Pad Tube.
Repeat this step with the other Pad Tube (12),
Foam Pads (13), and Pad Caps (5).
9. Insert a Weight Rest (15) into an Upright (1).
Rotate the Weight Rest so that the locking
pin is wrapped around the Upright.
Repeat this step with the other Weight Rest
(15). Make sure that the Weight Rests are at
the same height.
7
4
31
6
8
5
13
6
5
13
12
9
15
Locking
Pin
10
Grease
25
12
13
5
13
1
1
15
5