PART IDENTIFICATION CHART
Use the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the hard-
ware kit, check to see if it has been preattached.
M8 Locknut
M10 Locknut
M6 Washer
M8 Washer
M10 Washer
(11)
(31)
(22)
(10)
(30)
M6 x 16mm
M6 x 38mm
M8 x 45mm Bolt (28)
Screw (24)
Screw (32)
M10 x 35mm Carriage
M10 x 60mm Bolt (25)
Bolt (29)
M10 x 65mm Bolt (34)
M10 x 68mm Bolt (27)
M10 x 135mm Bolt (23)
6