Gold's Gym GGBE60610.4 User Manual page 11

10. Orient the Backrest (8) as shown.
Orient the Backrest Tubes (7) so that the indi-
cated holes are in the position shown.
Attach the Backrest Tubes (7) to the Backrest (8)
with four M6 x 38mm Screws (32) and four M6
Washers (22). Do not tighten the Screws yet.
11. Apply grease to an M10 x 135mm Bolt (23).
Attach the Backrest Tubes (7) to the welded
tube on the Frame (3) with the M10 x 135mm
Bolt (23), two M10 Washers (30), and an M10
Locknut (31). Do not overtighten the Locknut;
the Backrest Tubes must pivot easily.
See step 10. Tighten the M6 x 38mm
Screws (32).
10
Logo
8
Holes
32
11
31
30
7
3
Tube
11
7
22
32
22
30
23
Grease