General Description; Included Accessories - Lincoln Electric 12662 Operator's Manual

MULTIPROCESS WIRE FEEDER WELDER

General Description

This multi-process welding machine is intended for light
fabrication, maintenance, home and auto-body shops. The unit is
housed in a portable and rugged case, and features an intuitive
user interface with a push button for selecting processes and two
knobs for adjusting welding parameters. The machine also
features a cast aluminum wire drive system for reliable wire
feeding and an integrated switch for activating a Magnum
100SG spool gun. The multi-process machine is designed to be
connected to 120VAC single phase 60 Hz power.
This machine is capable of MIG, FCAW, TIG, and STICK welding.
The machine can support 4-inch and 8-inch spools of wire for MIG
and FCAW welding. The machine is intended for the following wire
diameters and composition; SuperArc
.035" solid steel, self-shielded NR
Outershield ® 71M .035" FCAW-GS. Welding aluminum ER4043
.035" requires use of the Magnum
integrated spool gun switch is pre-installed from the factory and
located above the wire drive. The machine also permits TIG
welding with .040, 1/16" and 3/32" tungsten and STICK welding
with up to 3/32" electrode.
7
1
® Pro
® L-56 ® .025" through
® -211MP .030" and .035", and
® Pro 100SG Spool Gun. An
6
5

inclUDeD accessories

1 Magnum ® Pro 100L gun
2 Work cable with clamp
3 Spare contact tips
4 Gas regulator* and gas hose
5 Gas and gasless nozzle
6 Electrode holder and cable
7 Sample spool of MIG and FCAW wire
8 Quick Start guide and literature
* The gas regulator knob is located in the wire drive compartment and must
be assembled to the regulator.
2
3
3
DESCRIPTION
4
8