Lincoln Electric 12666 Operator's Manual
  1. Manuals
  2. Brands
  3. Lincoln Electric Manuals
  4. Welding System
  5. 12666
  6. Operator's manual

Lincoln Electric 12666 Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operator's Manual
Ranger
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)
IM10378
| Issue D ate Apr-21
© Lincoln Global, Inc. All Rights Reserved.
305D
®
For use with machines having Code Numbers:
12666, 13169
Need Help? Call 1.888.935.3877
to talk to a Service Representative
Hours of Operation:
8:00 AM to 6:00 PM (ET) Mon. thru Fri.
After hours?
Use "Ask the Experts" at lincolnelectric.com
A Lincoln Service Representative will contact you
no later than the following business day.
For Service outside the USA:
Email: globalservice@lincolnelectric.com

Advertisement

Table of Contents
loading

Related Manuals for Lincoln Electric 12666

Summary of Contents for Lincoln Electric 12666

  • Page 1 Operator’s Manual Ranger 305D ® For use with machines having Code Numbers: 12666, 13169 Need Help? Call 1.888.935.3877 Register your machine: to talk to a Service Representative www.lincolnelectric.com/register Authorized Service and Distributor Locator: Hours of Operation: www.lincolnelectric.com/locator 8:00 AM to 6:00 PM (ET) Mon. thru Fri.
  • Page 2 THANK YOU FOR SELECTING A QUALITY PRODUCT BY KEEP YOUR HEAD OUT OF THE FUMES. DON’T get too close to the arc. LINCOLN ELEC TRIC. Use corrective lenses if necessary to stay a reasonable distance away from the arc. READ and obey the Safety Data PLEASE EXAMINE CARTON AND EQUIPMENT FOR Sheet (SDS) and the warning label DAMAGE IMMEDIATELY...
  • Page 3 W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electric Company, 2.d. All welders should use the following procedures in order to 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199.
  • Page 4 SAFETY ELECTRIC SHOCK ARC RAYS CAN BURN. CAN KILL. 3.a. The electrode and work (or ground) circuits are 4.a. Use a shield with the proper filter and cover plates to protect your electrically “hot” when the welder is on. Do eyes from sparks and the rays of the arc when welding or not touch these “hot”...
  • Page 5 SAFETY WELDING AND CUTTING CYLINDER MAY EXPLODE IF SPARKS CAN CAUSE DAMAGED. FIRE OR EXPLOSION. 7.a. Use only compressed gas cylinders containing the correct shielding gas for the process used 6.a. Remove fire hazards from the welding area. If and properly operating regulators designed for this is not possible, cover them to prevent the welding sparks the gas and pressure used.

  • Page 6: Table Of Contents

    Welding Output Cables ....................A-5 Cable Installation......................A-5 Electrical Device Used with the Ranger 305D..............A-6 Auxiliary Power Receptacles and Plugs................A-7 Standby Power Connections ....................A-7 Premises Wiring ........................A-8 Connection of Lincoln Electric Wire Feeders...............A-9,A-10 ________________________________________________________________________________ Operation.........................Section B Safety Precautions ......................B-1 General Description......................B-1 For Auxiliary Power ......................B-1 Engine Operation........................B-1...
  • Page 7 TABLE OF CONTENTS Maintenance......................Section D Safety Precautions ....................D-1 Routine Maintenance ....................D-1 Engine Maintenance Components ................D-1 Kubota Diesel Engine ....................D-1 Engine Oil Change..................D-2 Engine Oil Refill Capacities................D-2 Engine Oil Filter Change.................D-2 Air Cleaner Service ..................D-2 Service Instructions And Installation Tips for Engine Air Filter .......D-3 Cooling System .....................D-4 Fan Belt......................D-4 Fuel .........................D-4...

  • Page 8: Installation

    INSTALLATION TECHNICAL SPECIFICATIONS - Ranger® 305D (K1727-10) INPUT - DIESEL ENGINE Make/Model Description Speed (RPM) Displacement Starting Capacities cu. in. (cu. cm.) System 3 cylinder 43.88(789) 12VDC Battery & Fuel: 12 gal. 4 stroke starter (45 Liters) 18.8 HP High Idle 3650 Bore x Stroke inch (mm) Oil: 3.4Qts.

  • Page 9: Safety Precautions

    INSTALLATION SAFETY PRECAUTIONS LIFTING The RANGER® 305D weighs approximately WARNING 775lbs.(352kg.) with a full tank of fuel (698 lbs. less fuel). A lift bail is mounted to the machine and should always be used when lifting the machine. Do not attempt to use this equipment until you have thoroughly read the engine manufacturer’s WARNING manual supplied with your welder.

  • Page 10: Towing

    INSTALLATION PRE-OPERATION ENGINE SERVICE TOWING READ the engine operating and maintenance instruc- The recommended trailer for use with this equipment for road, tions supplied with this machine. in-plant and yard towing by a vehicle(1) is Lincoln’s K957-1. If the user adapts a non-Lincoln trailer, he must assume responsi- WARNING bility that the method of attachment and usage does not result in a safety hazard nor damage the welding equipment.

  • Page 11: Battery Connections

    INSTALLATION REMOTE CONTROL ENGINE COOLING SYSTEM The RANGER® 305D is equipped with a 6-pin and a WARNING 14-pin connector. The 6-pin connector is for connect- ing the K857 or K857-1 Remote Control or for TIG welding, the K870 foot Amptrol or the K936-3 hand Air to cool the engine is drawn in the base sides Amptrol.

  • Page 12: Welding Terminals

    INSTALLATION When this welder is mounted on a truck or trailer, its CABLE INSTALLATION frame must be electrically bonded to the metal frame Install the welding cables to your RANGER® 305D as of the vehicle. Use a #8 or larger copper wire connect- follows.

  • Page 13: Electrical Device Used With The Ranger 305D

    DO NOT USE THESE DEVICES WITH A RANGER® 305D The Lincoln Electric Company is not responsible for any damage to electrical components improperly connected to the RANGER® 305D. RANGER 305D...

  • Page 14: Standby Power Connections

    INSTALLATION AUXILIARY POWER RECEPTACLES • Install the double-pole, double-throw switch between the power company meter and the premis- es disconnect. Switch rating must be the same or Start the engine and set the “IDLER” control switch to greater than the customer’s premises disconnect the “High Idle”...

  • Page 15: Premises Wiring

    INSTALLATION CONNECTION OF RANGER® 305D TO PREMISES WIRING 240 VOLT GROUNDED CONDUCTOR POWER 240 Volt 120 VOLT 60 Hz. COMPANY 3-Wire 120 VOLT Service METER NEUTRAL LOAD DOUBLE POLE DOUBLE THROW SWITCH RATING TO BE THE SAME AS OR GREATER THAN PREMISES SERVICE OVERCURRENT PROTECTION.

  • Page 16: Connection Of Lincoln Electric Wire Feeders

    INSTALLATION • Across The-Arc Model: CONNECTION OF LINCOLN ELECTRIC WIRE FEEDERS Attach the single lead from the front of the LN-15 to work using the spring clip at the end of the lead. This is a control lead to supply current to the wire feeder Connection of LN-7 or LN-8 to the RANGER®...
  • Page 17 INSTALLATION A-10 A-10 Connection of LN-742, Spool Gun (K487-25) and WARNING Cobramatic to RANGER® 305D Connection of the LN-25 to the RANGER® 305D • Shut the welder off. Shut off welder before making any electrical con- nections. • Connect per instructions on the appropriate connec- -------------------------------------------------------------------------------- tion diagram in Section F.

  • Page 18: Operation

    OPERATION SAFETY PRECAUTIONS • Add oil (if necessary) to bring the level up to the full mark. Do not overfill. Close engine door. WARNING • Check radiator for proper coolant level. (Fill if nec- essary). • See Engine Owner’s Manual for specific oil and Do not attempt to use this equipment until you coolant recommendations.
  • Page 19 OPERATION FIGURE B.1 WELDING CONTROLS (Figure B.1) 2. DIGITAL OUTPUT METERS- The digital meters allow the output voltage (CV-WIRE mode) 1. OUTPUT CONTROL- or current (CC-STICK,DOWN HILL PIPE and TIG The OUTPUT dial is modes) to be set prior to welding using the OUT- used to preset the output voltage or current as dis- PUT control dial.

  • Page 20: Engine Controls

    OPERATION 10. WIRE FEEDER VOLTMETER SWITCH: 4. ARC CONTROL - The ARC CONTROL dial is active in Matches the polarity of the wire feeder voltmeter to the CV-WIRE, CC-STICK and DOWNHILL PIPE modes, the polarity of the electrode. and has different functions in these modes. This control is ENGINE CONTROLS: not active in the TIG mode.

  • Page 21: Duty Cycle

    OPERATION 15. ELECTRIC FUEL GAUGE- NOTE: If the unit fails to start repeat step 4 through The electric fuel step 7 after waiting 30 seconds gauge gives accurate and reliable indication as to how much fuel is in the fuel tank. CAUTION 16.

  • Page 22: Constant Current (Stick) Welding

    OPERATION The Ranger® 305D can be used with a broad range of DC It is recommended that the ARC CONTROL be set to the stick electrodes. The MODE switch provides two stick minimum number without electrode sticking. Start with welding settings as follows: the dial set at 0.

  • Page 23: Wire Welding-Cv

    .045 (1.1 mm), Super Arc L-50 and L-56, .035 (0.9 mm) and .045 (1.1 mm) Blue Max MIG 308 LS. Contact your local authorized Lincoln Electric Distributor or the Lincoln Electric Company for specific wires used on certain appli- cations with this machine. RANGER® 305D...

  • Page 24: Auxiliary Power

    OPERATION AUXILIARY POWER: The 120 V auxiliary power receptacles should only be used with three wire grounded type plugs or approved double insulated tools with two wire plugs. The current If a GFCI receptacle is tripped, See the MAINTE- rating of any plug used with the system must be at NANCE section for detailed information on testing and least equal to the current capacity of the associated resetting the GFCI receptacle.

  • Page 25: Accessories

    ACCESSORIES FIELD INSTALLED OPTIONS / K802-N POWER PLUG KIT ACCESSORIES Provides four 120 volt plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240 volts, 50 amps. K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR SMALL WELDERS K802-R POWER PLUG KIT For road, off-road and in-plant and yard towing.

  • Page 26: Maintenance

    MAINTENANCE SAFETY PRECAUTIONS KUBOTA D722 DIESEL ENGINE FREQUENCY MAINTENANCE REQUIRED WARNING • FILL FUEL TANK. • CHECK OIL LEVEL. • Have qualified personnel do all maintenance • CHECK COOLANT LEVEL. • CHECK AIR CLEANER ELE- and troubleshooting work. MENT AND HOUSING FOR DIRTY, LOOSE OR DAMAGED •...

  • Page 27: Engine Oil Change

    MAINTENANCE Oil Filter Change Engine Oil Change • Drain the oil. Drain the engine oil while the engine is warm to assure rapid and complete draining. It is recommend- • Remove the oil filter with an oil filter wrench and ed that each time the oil is changed the oil filter be drain the oil into a suitable container.
  • Page 28 MAINTENANCE Service Instructions Service Instructions Single- and Two-Stage Engine Air Cleaners Single- and Two-Stage Engine Air Cleaners Inspect the New Filter for Damage Inspect the New Filter for Damage Remove the Filter Remove the Filter Inspect the new filter carefully, paying attention to Unfasten or unlatch the the inside of the open end, which is the service cover.

  • Page 29: Cooling System

    MAINTENANCE FUEL COOLING SYSTEM WARNING At the end of each day’s use, refill the fuel tank to min- imize moisture condensation and dirt contamination in HOT COOLANT can burn skin. the fuel line. Do not overfill; leave room for the fuel to expand.

  • Page 30: Fuel Filter

    MAINTENANCE CLEANING THE BATTERY FUEL FILTER Keep the battery clean by wiping it with a damp cloth 1. Check the fuel filter and fuel pre-filter for water when dirty. If the terminals appear corroded, discon- accumulation or sediment. nect the battery cables and wash the terminals with an ammonia solution or a solution of 1/4 pound (0.1113 2.

  • Page 31: Welder / Generator Maintenance

    • Push the "Reset" button, again. The light or other product should go "ON" again. • Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel. If the light or other product remains "ON" when the Unauthorized repairs performed on this equip- "Test"...

  • Page 32: Troubleshooting

    HOW TO USE TROUBLESHOOTING GUIDE WARNING Service and Repair should only be performed by Lincoln Electric Factory Trained Personnel. Unauthorized repairs performed on this equipment may result in danger to the technician and machine operator and will invalidate your factory warranty. For your safety and to avoid Electrical Shock, please observe all safety notes and precautions detailed throughout this manual.
  • Page 33 TROUBLESHOOTING Observe all Safety Guidelines detailed throughout this manual PROBLEMS POSSIBLE RECOMMENDED (SYMPTOMS) CAUSE COURSE OF ACTION 1. Contact your local Lincoln Major Physical or Electrical Damage Authorized Field Service is Evident. Facility. Engine will not "crank". 1. Battery is low, Charge Battery. 2.
  • Page 34 TROUBLESHOOTING Observe all Safety Guidelines detailed throughout this manual PROBLEMS POSSIBLE RECOMMENDED (SYMPTOMS) CAUSE COURSE OF ACTION Engine shuts down while under a 1. High radiator coolant tempera- load. ture. Reduce load if it is exceed- ing machine rating. Add coolant to system if low.
  • Page 35 TROUBLESHOOTING Observe all Safety Guidelines detailed throughout this manual PROBLEMS POSSIBLE RECOMMENDED (SYMPTOMS) CAUSE COURSE OF ACTION Engine will not go to high idle when 1. Auxiliary power load is less than using auxiliary power. 100 watts. Idler may not respond with less than a 100 watt load.
  • Page 36 TROUBLESHOOTING Observe all Safety Guidelines detailed throughout this manual PROBLEMS POSSIBLE RECOMMENDED (SYMPTOMS) CAUSE COURSE OF ACTION No welding power output. 1. Poor work lead connection to work. Make sure work clamp is tightly connected to clean base metal. 2. "Weld Terminals" switch in wrong position.
  • Page 37 TROUBLESHOOTING Observe all Safety Guidelines detailed throughout this manual PROBLEMS POSSIBLE RECOMMENDED (SYMPTOMS) CAUSE COURSE OF ACTION The welding arc is “cold.” The weld- 1. Make sure the MODE selector ing arc is not stable or is not satis- switch is in the correct position for factory.
  • Page 38 DIAGRAMS RANGER® 305D...
  • Page 39 DIAGRAMS RANGER® 305D...
  • Page 40 DIAGRAMS RANGER® 305D...
  • Page 41 DIAGRAMS RANGER® 305D...
  • Page 42 DIAGRAMS RANGER® 305D...
  • Page 43 DIAGRAMS RANGER® 305D...
  • Page 44 DIAGRAMS RANGER® 305D...
  • Page 45 DIMENSION PRINT RANGER® 305D...
  • Page 46 Ranger 305D - 12666...
  • Page 47 THIS PAGE INTENTIONALLY LEFT BLANK...
  • Page 48 Index of Sub Assemblies - 12666 PART NUMBER DESCRIPTION P-1107-A INDEX OF SUB ASSEMBLIES P-1107-C CASE FRONT ASSEMBLY P-1107-D CONTROL PANEL ASSEMBLY P-1107-E STATOR ROTOR ASSEMBLY P-1107-F BLOWER BAFFLE ASSEMBLY P-1107-G BASE FUEL TANK BATTERY ASSEMBLY P-1107-H ENGINE ASSEMBLY P-1107-J COVERS &...
  • Page 49 Index of Sub Assemblies - 12666 P-1107-A.jpg Ranger 305D - 12666...
  • Page 50 HEX HD SCREW 9SS9262-1 PLAIN WASHER 9SE106A-15 LOCKWASHER 9SS24982 BYPASS FILTER ASBLY 9SS9262-27 PLAIN WASHER 9SE106A-1 LOCKWASHER 9SCF000010 #10-24HN 9SG4244-4 WIRING HARNESS 9SM19685-3 CONNECTOR & LEAD ASBLY 9SS12021-70 BOX RECEPTACLE SOLID SHELL 9SS12021-68 CONNECTOR 9ST12287-38 CIRCUIT BREAKER Ranger 305D - 12666...
  • Page 51 LOCKWASHER 9SS9225-76 SELF TAPPING SCREW 9SS9262-27 PLAIN WASHER 9SCF000010 #10-24HN 9SE106A-1 LOCKWASHER 9ST9695-1 LOCKWASHER 9SL12790-2 RATING PLATE 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SM20007 OUTPUT STUD COVER 9SS25669 OUTPUT STUD COVER PLATE 9SS9225-68 THREAD FORMING SCREW (CUTTING) Ranger 305D - 12666...
  • Page 52 Case Front Assembly P-1107-C.jpg Ranger 305D - 12666...
  • Page 53 RIVET 9SS21033 DOOR LATCH 9SS24659 CATCH BRACKET 9SS8025-98 SELF TAPPING SCREW 9SS17585-1 FUEL GAUGE 9SS18250-889 PLUG & LEAD ASBLY 9SM19452-3 OPERATION DECAL 9ST13534-11 PILOT LIGHT 9SL11160 METER HOUSING ASBLY 9SS24630 METER HOUSING SEAL 9SM19368 METER BEZEL Ranger 305D - 12666...
  • Page 54 Control Panel Assembly PART NUMBER DESCRIPTION 9ST14807-9 FILTER LENS 9SCF000389 #4-40X.375SS-PPNHS-FULL-GR2-3147 9SCF000005 #6-32HN 9SS9262-3 PLAIN WASHER 9ST10800-39 SWITCH-TOGGLE 9SS22061-4 SEALING BOOT 9ST10800-38 SWITCH-TOGGLE 9SS22061-4 SEALING BOOT Ranger 305D - 12666...
  • Page 55 Control Panel Assembly P-1107-D.jpg Ranger 305D - 12666...
  • Page 56 BRUSH & BRUSH HOLDER ASBLY 9SG2114 BRUSH HOLDER CARTRIDGE 9SS19480 BRUSH ASBLY 9SM16157 BRUSH ASBLY RETAINER 9SM18336 BRUSH HOLDER 9SS8025-91 SELF TAPPING SCREW 9SCF000015 1/4-20X1.00HHCS 9SE106A-2 LOCKWASHER 9SS9262-98 PLAIN WASHER 9SCF000017 1/4-20HN 9SG3404 FIREWALL 9ST12380-1 BUSHING 9ST14882-1 DOOR BUMPER Ranger 305D - 12666...
  • Page 57 Stator Rotor Assembly P-1107-E.jpg Ranger 305D - 12666...
  • Page 58 LOCKWASHER 9SCF000017 1/4-20HN 9SCF000191 #10-24X7.50RHS 9SS9262-27 PLAIN WASHER 9SE106A-1 LOCKWASHER 9SCF000010 #10-24HN 9SS14293-20 RELAY HEAVY DUTY 12VDC SPDT 9SS8025-91 SELF TAPPING SCREW 9SS14531-5 RELAY SOCKET 9ST13637-6 DIODE-BRIDGE35A400VF-W1-PH 9SCF000072 #10-24X.75RHS 9SCF000010 #10-24HN 9SE106A-1 LOCKWASHER 9SS9262-27 PLAIN WASHER Ranger 305D - 12666...
  • Page 59 SELF TAPPING SCREW 9SS9225-76 SELF TAPPING SCREW 9SS9262-27 PLAIN WASHER 9SCF000010 #10-24HN 9SE106A-1 LOCKWASHER 9ST9695-1 LOCKWASHER 9SS18543-5 GROMMET 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SS10404-132 RESISTORWW25W105% 9SCF000009 #10-24X3.00RHS 9ST4479-A INSULATING WASHER 9SS9262-27 PLAIN WASHER 9SE106A-1 LOCKWASHER 9SCF000010 #10-24HN Ranger 305D - 12666...
  • Page 60 Blower Baffle Assembly P-1107-F.jpg Ranger 305D - 12666...
  • Page 61 FUEL TANK BRACE 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SM9399-14 12 VOLT STORAGE BATTERY 9SS8070-28 BATTERY CABLE 9SS8070-11 BATTERY CABLE 9ST14654 CAP-PLASTIC 9SS22018 BATTERY BRKT 9ST11827-45 CARRIAGE BOLT 9SE106A-2 LOCKWASHER 9SCF000017 1/4-20HN 9SS20191-1 BATTERY TERMINAL COVER 9ST10642-257 FLEX TUBE Ranger 305D - 12666...
  • Page 62 9ST13777-6 HOSE CLAMP 9ST10642-91 FLUX TUBE 9SS10888-35 HOSE CLAMP 9ST13777-5 HOSE CLAMP 9SL11643 ENGINE SUPPORT 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SM19770 BATTERY ACCESS DOOR 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SS17851 DECAL-CAUTION Ranger 305D - 12666...
  • Page 63 Base, Fuel Tank, Battery Assembly P-1107-G.jpg Ranger 305D - 12666...
  • Page 64 OUTLET PIPE ELBOW 9SCF000187 5/16-18X2.50HHCS 9SE106A-14 LOCKWASHER 9SCF000029 5/16-18HN 9SL11898 SOLENOID BRACKET 9ST14731-3 METRIC HEX HD SCREW-M8 X1.25 9SE106A-14 LOCKWASHER 9SCF000014 1/4-20X.75HHCS 9SS9262-98 PLAIN WASHER 9SE106A-2 LOCKWASHER 9SCF000017 1/4-20HN 9SS9262-121 PLAIN WASHER 9SS25362-2 HOSE NIPPLE (MALE) Ranger 305D - 12666...
  • Page 65 1/4-28HN 9SS25108 GOVERNOR ARM BRACKET 9SCF000014 1/4-20X.75HHCS 9SE106A-2 LOCKWASHER 9SS9262-98 PLAIN WASHER 9SCF000017 1/4-20HN 9SL11880 LIFTBALE ASBLY 9SCF000034 3/8-16X.75HHCS 9SE106A-16 LOCKWASHER 9ST10642-256 FLEX TUBE 9ST13777-5 HOSE CLAMP 9ST10642-91 FLUX TUBE 9ST13777-5 HOSE CLAMP 9ST10642-256 FLEX TUBE Ranger 305D - 12666...
  • Page 66 Engine Assembly PART NUMBER DESCRIPTION 9ST13777-5 HOSE CLAMP Ranger 305D - 12666...
  • Page 67 Engine Assembly P-1107-H.jpg Ranger 305D - 12666...
  • Page 68 LOCKWASHER 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SS9970-2 RADIATOR CAP 9ST9956 DRAIN COCK 9SG4243 CASE BACK 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9ST14659-1 FASTENER BUTTON 9SG4058-1 RIGHT FAN GUARD 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9SG4060-1 LEFT FAN GUARD Ranger 305D - 12666...
  • Page 69 9SS30277-3 WARRANTY DECAL 9SM15045-40 ACOUSTICAL FOAM 9SS25514 COOLANT BOTTLE BRACKET 9SS9225-68 THREAD FORMING SCREW (CUTTING) 9ST12380-1 BUSHING 9SS25896 DECAL-WARNING 9SM17238 INSTRUCTION TAG 9SS24727-1 DECALCOUNTRY OF ORIGIN 9ST13086-91 DECAL-115 VOLTS AC 9SM21952-1 DECAL - RANGER FAMILY NAME Ranger 305D - 12666...
  • Page 70 Covers & Case Back Assembly P-1107-J.jpg Ranger 305D - 12666...
  • Page 71 WARNING Do not touch electrically live parts or Keep flammable materials away. Wear eye, ear and body protection. electrode with skin or wet clothing. Insulate yourself from work and AVISO DE ground. Spanish PRECAuCION No toque las partes o los electrodos Mantenga el material combustible Protéjase los ojos, los oídos y el bajo carga con la piel o ropa moja-...
  • Page 72 WARNING Keep your head out of fumes. Turn power off before servicing. Do not operate with panel open or Use ventilation or exhaust to guards off. remove fumes from breathing zone. AVISO DE Spanish PRECAuCION Los humos fuera de la zona de res- Desconectar el cable de ali- No operar con panel abierto o piración.
  • Page 73 Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice.

This manual is also suitable for:

Ranger 305d13169

Table of Contents