Bartack Feed Of Buttonhole - Janome HF2022 Service Manual

BARTACK FEED OF BUTTONHOLE

CORRECT SETTING
IF THE MATERIAL IS FED FORWARD OF BACKWARD WHEN SEWING BARTAC ON BUTTONHOLE,
MAKE AN ADJUSTMENT AS FOLLOWS:
TO ADJUST
1. SET THE PATTERN SELECTOR DIAL AT "
(SET THE PATTERN SELECTOR DIAL AT "
2. REMOVE THE FRONT COVER. (SEE PAGE 5.)
3. PLACE A PIECE OF PAPER UNDER THE FOOT AND TURN THE BALANCE WHEEL.
IF THE PAPER IS FED FORWARD, TURN THE ADJUSTING SCREW IN THE DIRECTION OF
C.
IF THE PAPER IS FED BACKWARD, TURN THE ADJUSTING SCREW IN THE DIRECTION OF
D.
4. MOUNT THE FRONT COVER.
* IN CASE OF MODEL 1541 HAVING ONE STEP BUTTONHOLE FUNCTION, THE
ADJUSTING SCREW AND PRESSER FOOT ARE DIFFERENT FROM THOSE DESCRIBED
ABOVE.
FORWARD FEEDING
MECHANICAL ADJUSTMENT
(FOR MODEL 1541)
ADJUSTING SCREW
PAPER
BACKWARD FEEDING
" AND THE STITCH LENGTH DIAL AT "4".
" ON CASE OF MODEL 1541.)
19
ADJUSTING SCREW