Bartack Feed Of Buttonhole - Janome 13512 Service Manual

BARTACk FEED OF BUTTONHOLE

TO CHECk:
If the material is fed forward or backward when sewing bartack on buttonhole, make an adjustment as follows:
ADJUSTmENT PROCEDURE:
1. Set the pattern selector dial at "
2. Remove the front cover (See page 6).
3. Place a piece of paper under the foot and turn the handwheel.
If the paper is fed forward, turn the adjusting screw in the direction of (C).
If the paper is fed backward, turn the adjusting screw in the direction of (D).
4. Attach the front cover.
Forward feeding
Backward feeding
mECHANICAL ADJUSTmENT
", and the stitch length dial at "4".
Stitch length dial
(D)
20
(C)
Adjusting screw