Camera Settings - DOD RC500S User Manual

Camera Settings

All settings are changed via the DOD Dash Cam APP; all changes made will be
automatically saved. Settings can only be changed once the recording is stopped. For
details of each function please see the description below.
Display Mode
Live view screen display is default to be large front and small rear, can be changed to
front view only, rear view only, or large rear with small front.
Video Stamp
Imprints the time, date, vehicle speed and GPS coordinates onto the recorded video
file.
Loop Recording
Can be set to 1, 3, 5 or 10 minute per video section saved in memory card. When the
memory card is full, the oldest files will be overwritten, excluding locked clips. Turing off
loop recording will result in 30 minutes per video until the memory card is full, and will
not continue recording after. For downloading files onto a smart device, 1 minute files
are faster.
Camera time
Choice of Synchronizing with GPS or set manually.
Volume Setting
Choice of High / Mid / Low / OFF, if the volume setting is off, all voice notifications and
alerts will be muted.
Set Time Zone
Sets the current time zone for GPS time and date auto calibration. Note the time zone
must be manually adjusted for daylight savings
Traffic Camera Warning
Warning sound and on-screen icon to remind you of approaching traffic camera such
as fixed speed camera, red-light camera or hot-spots for mobile police camera. Speed
camera warning will not be activated below 20km/h or 12mph. Speed camera icon will
not appear in Heads Up Display mode.
Note: Currently supported: US, CA, UK, NO, PL, NL, BE, AU.
25