Firmware Update - DOD RC500S User Manual

Firmware Update

See the support section on DOD Tech's website for any available firmware updates and
instructions.
Note:
Please ensure stable power during firmware update, otherwise may result in update
failure or malfunction.
When update completes, system will show option to format SD card. Please ensure
to format SD card by computer / dashcam to prevent update repeatedly.
About SD Card
Test the Micro SD memory card regularly as the memory card is a consumable item, and needs to
be replaced periodically.
Reformat the memory card in the camera menu every two weeks to extend usable lifetime. This
should only be done AFTER desired files have been saved elsewhere, such as portable hard drive.
Formatting the memory card will clear all files, including RO files.
DOD is NOT responsible for any malfunctions caused from the use of disingenuous, modified, or
unauthorized parts and accessories.
DOD does NOT guarantee the recording of accidents which may produce excessive force of
impact causing the device to malfunction and fault.
The working temperature of this product is -20°C~65°C(-4°F~149°F). Please ensure the device is
stored within the temperature range; or the device may be damaged and or malfunction, which
these circumstances are not covered by warranty.
DOD is NOT responsible for the loss of any recorded video during operation due to unexpected
factors or force majeure when driving.
The video recordings filmed by this Dash Cam are intended for personal use ONLY.
Suggested to use Class 10 and MLC flash memory cards.
DOD Tech recommend NOT to use Sandisk branded or TLC flash memory cards.
Note:
64GB or greater capacity cards will show "SD Card Error" when first insert into
dash cam. Please use formatting function in system menu to format SD card prior to
usage to ensure proper functionalities.
When formatting via computer, 64GB or greater requires formation program to
transform original exFAT format to FAT32 to properly function in dash cam.
32