Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ClearView IPD-81A
Summary of Contents for ClearView IPD-81A
- Page 1 HD IR Vandal Proof Wedge Dome Network Camera Quick Start Guide Version 1.0.0...
-
Page 2: Important Safeguards And Warnings
Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1．Electrical safety ... - Page 3 Please do not touch the heat dissipation component of the device directly in order to avoid scald. Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling.
- Page 4 Please contact the customer service for the latest procedure and supplementary documentation. There may be deviation between the actual value of some data and the value provided in the manual due to the reasons such as the real environment is not stable and so on. Please refer to the company’s final explanation if there is any doubt or dispute.
-
Page 5: Table Of Contents
Table of Contents Device Structure ........................1 Structure Components ....................1 Framework and Dimension ..................2 Alarm Setup ........................3 Device Installation ........................6 Network Configuration ......................8 Modify IP Address ......................8 Login WEB Interface ....................9... -
Page 6: Device Structure
1 Device Structure 1.1 Structure Components Note: The following figure is for reference only, which is used to know the components and cable port function. There are differences about structure components and cables between different models, please refer to the actual object for more details. You can refer to the following figure for component structure. -
Page 7: Framework And Dimension
Figure 1-3 Please refer to the following sheets for detailed information. Component Component Name Component 1 Dome enclosure Component 2 Dome cover Sheet 1-1 Port Port Name Function Network data in/out and PoE. Port 1 Internet access port Note: Some devices do not support PoE. Port 2 Power input port Connect to DC 12V power, input power. -
Page 8: Alarm Setup
Figure1-4 Figure 1-5 1.3 Alarm Setup Note: The chapter is only supported by some series products. - Page 9 Figure1-6 Alarm input, output description: Step 1 Connect alarm input device to the alarm input of I/O cable. Step 2 Connect alarm output device to the alarm output of I/O cable, alarm output is collector open circuit output which connects 10K resistor to 3.3V externally. Step 3 Open the Web, set alarm input and output correspondingly.
- Page 10 Figure 1-8 Figure 1-9 Mode A: Level application. Alarm output high and low level, alarm output is OC; it needs to increase pull-up resistance externally to work normally. Max external pull-up level is 5V, max port current is 5mA. After external pull-up resistance is increased, the default of output signal is high level (external pull-up voltage), and it switches to low level when there is alarm output (when the working current is 5mA, output voltage is less than 0.8V).
-
Page 11: Device Installation
2 Device Installation Note: Before the installation, please make sure the installation environments can at least support 3x weight of the camera and the bracket. Please cut off the device power and turn off the device before installing Micro SD card. Figure 2-1 Step 1 Loosen M4×20 screw and take down the dome enclosure. - Page 12 Figure 2-2 Note: Long press the reset button for 5 to 10 seconds to realize device reset function. Step 3 Fix the device on the installation surface. 1. Please take out the installation position map in the accessories bag, and then paste it on the ceiling or the wall according to the outlet location, then dig four holes on the installation surface according to the sign on the installation position map.
-
Page 13: Network Configuration
3 Network Configuration The IP address of all the cameras is the same when leaving factory (default IP192.168.1.108), in order to make the camera get access to the network smoothly, please plan the useable IP segment reasonably according to the actual network environment. 3.1 Modify IP Address IP address can be acquired and modified through quick configuration tool for the cameras which are accessed via wired network, it needs to connect wired network to configure wireless parameters... -
Page 14: Login Web Interface
Figure 3-1 Step 3 Modify the camera IP address on the “Net” interface, click “Save” to finish modification. See Figure 3-2 for more details. Figure 3-2 3.2 Login WEB Interface Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to the document <<WEB Operation Manual>>... - Page 15 Figure 3-3 Step 3 Install controls according to the system prompt; see Figure 3-4 for the WEB main interface. Please modify the administrator password as soon as possible after you successfully logged in. Figure 3-4...
- Page 16 Note: This quick start guide is for reference only. Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners.
Need help?
Do you have a question about the IPD-81A and is the answer not in the manual?
Questions and answers