Vega VEGABAR 64 Operating Instructions Manual page 41

Menu section
Optional settings
VEGABAR 64 • Foundation Fieldbus
6 Set up with the indicating and adjustment module PLICSCOM
Function
Application
Factory setting
Like basic adjustment, furthermore special parameters are reset to
8)
default values.
Pointer
The min. and max. distance values are reset to the actual value.
Additional adjustment and diagnosis options such as e.g. scaling,
simulation or trend curve presentation are shown in the following menu
schematic. You will find a detailed description of these menu items in
the operating instructions manual "Indicating and adjustment module".
8)
Special parameters are parameters which are set customer-specifically on
the service level with the adjustment software PACTware.
Reset value
no reset
41