Table of Contents
Advertisement
3-8 UPC-A
Read:
Format
Check digit verification: The check digit verification is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a
succeeding reading. If you want application to transmit Code ID, you must set Code ID transmission to
be enabled. Refer to
Insertion group selection: Refer to Global insertion group selection of
settings
.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters.
Format
System character
Truncation/Expansion:
Truncate leading zeros- The leading "0" digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN13- It extends to 13-digits with a "0" leading digit when the feature is enabled.
Truncate system character- The system character of UPC-A data can be truncated when the feature is
enabled.
Add country code- The country code ("0" for USA) can be added when the feature is enabled.
Option bar code
Read
Check digit verification
Check digit trans.
System character
3-32 String transmission
Data digits (10 digits)
SETUP
Disable
Enable
Disable
Enable
Disable
Enable
Data digits (10 digits)
.
Check digit
Option
Alpha. entry
00
01*
00
01*
00
01*
37
Check digit
3-8 Hand-held scan & some global
Supplement digits 2 or 5
Single-scan setting
*
*
*
Hide quick links:
Advertisement
Table of Contents
