Table of Contents
Advertisement
3-14 UPC-A
Read:
Format
Check digit verification: The check digit is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a
succeeding reading. If you want application to transmit Code ID, you must set Code ID transmission to
be enabled, refer to
3-46 String
Insertion group selection: Refer to Global insertion group selection of
global
settings.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters.
Format
System character
Truncation/Expansion:
Truncate leading zeros- The leading "0" digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN-13- It extends to 13-digits with a "0" leading digit when the feature is enabled.
Truncate system character- The system character of UPC-A data can be truncated when the feature
is enabled.
Add country code- The country code ("0" for USA) can be added when the feature is enabled.
System character
Data digits (10 digits)
transmission.
Data digits (10 digits)
Check digit
Check digit
Supplement digits 2 or 5
41
3-9 Handheld scan & some
Advertisement
Table of Contents
