Table of Contents
Advertisement
6
Adjust the volume using the
volume control on the
amplifier or TV in HDMI zone.
Tip
You can avoid possible interference to the signals
in main zone by setting [Priority] to [Main Only] in
the [HDMI Settings] menu. However, if the same
input is selected in HDMI zone, there will be no
video or audio output from HDMI zone. For details
on the setting, refer to "Setting the priority for the
main zone (Priority)" in Help Guide.
The HDMI OUT B/HDMI ZONE jack supports
bandwidths up to 9 Gbps if [HDMI Out B Mode] is
set to [Zone] in the [HDMI Settings] menu.
To exit zone operation
Set [HDMI Zone Power] to [Off] in step 4.
Available inputs for each zone
Available inputs vary depending on the zone
you have selected. Select the input you want
on TV screen or display panel.
For details on the available inputs, refer to
"Available inputs for each zone" in Help
Guide.
For main zone
You can select all input source from every
device connected to the receiver in the main
zone.
For Zone 2
You cannot watch video in Zone 2. Sound is
not available from devices connected to the
HDMI IN jacks.
Note
Signals from the HDMI IN, OPTICAL IN and COAXIAL
IN jacks cannot be output to the speakers in Zone
2.
You can select either [USB], [Home Network],
[Music Service List] or [Bluetooth] from the main
zone and Zone 2. Priority is given to the choice
which has most recently been selected, even if a
different choice has already been selected in one
of the zones.
If you connect BLUETOOTH headphones to the
main zone while a connected device is playing and
the current input in Zone 2 is [USB], [Home
Network] or [Music Service List], the input for Zone
2 will change to [SOURCE]. In this case, only FM
tuner and analog audio signal are output to Zone
2.
If you connect BLUETOOTH headphones to the
main zone while a connected device is playing, the
BLUETOOTH headphones will be disconnected if
you select [USB], [Home Network] or [Music Service
List] in Zone 2.
If you set [DSD Native] in [Audio Settings] to [On],
no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 2 speakers.
For HDMI zone
You can only watch video or listen to audio
input from the HDMI IN jacks (except for
VIDEO 1).
GB
43
Hide quick links:
Advertisement
Table of Contents
