Table of Contents
Advertisement
When [Enhanced format] is selected, we
recommend you to use a Premium High Speed
HDMI Cable with Ethernet, which can support
bandwidth up to 18 Gbps.
Some devices (cable box or satellite box, Blu-ray
Disc player, and DVD player) does not work well
with [Enhanced format] setting. In this case, select
[Standard format].
If your TV have similar menu for high bandwidth
video format, check the setting on the TV menu
when you select [Enhanced format] on this
receiver. For details on the TV menu setting, refer
to the operating instructions of the TV.
Since the HDMI IN VIDEO 1 jack does not support
video formats such as 4K/60p 4:4:4, 4:2:2 and 4K/
60p 4:2:0 10 bit, you cannot set the HDMI signal
format.
Enjoying sound from speakers
located in other rooms (Zone 2)
1
Connect the speakers located
in Zone 2 (page 23).
2
Turn on the receiver.
3
Select a speaker pattern, and
set the assignment for the
speaker terminals.
Press HOME, then select [Setup] –
[Speaker Settings] – [Speaker
Pattern].
Select a speaker pattern without
surround back speakers, and then
select [Save].
Select [Surround Back Speaker
Assign] –[Zone2].
4
Press HOME, then select [Zone
Controls].
5
Set [Zone2] – [Zone2 Power] –
[On].
You can also press ZONE SELECT on the
receiver repeatedly to select
"ZONE2 ON ?", then press ZONE POWER
on the receiver to set.
6
Select [Zone2 Input], then
select the source signals you
want to output.
You can also turn INPUT SELECTOR on the
receiver while "2. xxxx"* appears on the
display panel.
Tip
If you want to listen to the same sound as main
zone in Zone 2, select [SOURCE].
7
Start playback on the selected
input device.
8
Select [Zone2 Volume], then
adjust the volume.
You can also turn MASTER VOLUME on
the receiver while "2. xxxx"* appears on
the display panel.
* "xxxx" is the input name.
To exit zone operation
Set [Zone2 Power] to [Off] in step 5.
Note
Only audio signals from [USB], [Bluetooth] (only
when [Bluetooth Mode] is set to [Receiver]), [Home
Network], [Music Service List], and [FM TUNER] and
audio signals input from AUDIO IN jacks located on
the rear panel of the receiver are output to the
Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN
and HDMI IN jacks cannot be output to Zone 2.
If you set [DSD Native] in [Audio Settings] to [On],
no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 2 speakers.
GB
41
Hide quick links:
Advertisement
Table of Contents
