Parts And Controls; Front Panel - Sony STR-DN1080 Operating Instructions Manual

Parts and Controls

Receiver

Front panel

  (power) (page 37)
 Power indicator
 SPEAKERS (page 39)
 CONNECTION
Operates the BLUETOOTH function.
 TUNER PRESET +/–
Selects preset stations or channels.
 NFC sensor
 2CH/MULTI, MOVIE, MUSIC (page 44)
 Display panel (page 11)
 DISPLAY MODE
Switches information on the display panel.
 ZONE SELECT, ZONE POWER (page 41,
42)
 DIMMER
Adjusts the brightness of the display panel.
 Remote control sensor
Receives signals from remote control.
 PURE DIRECT
The indicator above the button lights up when
the Pure Direct function is activated.
 MASTER VOLUME (page 40)
 INPUT SELECTOR (page 40)
  (USB) port
Connect a USB device here.
 CALIBRATION MIC jack (page 39)
GB
10
PAIRING BLUETOOTH
 PHONES jack
Connect headphones here.
Power indicator
 Green: The receiver is turned on.
 Amber: The receiver is in standby mode,
and you have set one of the following:
 [Control for HDMI], or [Bluetooth Standby]
is set to [On].
 [Standby Through] is set to [On] or [Auto].
 [Zone2 Power] or [HDMI Zone Power] is
set to [On].
 The indicator goes off: The receiver is in
standby mode and all of the following
settings are set to [Off]:
 [Control for HDMI]
 [Standby Through]
 [Bluetooth Standby]
 [Zone2 Power] and [HDMI Zone Power]