Selecting The Front Speakers - Sony STR-DN1080 Operating Instructions Manual

Multi channel av receiver

Hide thumbs Also See for STR-DN1080:

Service manual (98 pages)

Manual (221 pages)

Table Of Contents

Table of Contents

Enlarged version



Connect the supplied calibration

microphone to CALIBRATION MIC jack. Set

up the calibration microphone at your

listening position.

Note



The speakers emit very loud sound during the

calibration and the volume cannot be adjusted.

Be considerate of your neighbors and any

children who are present.



If the muting function has been activated before

you perform Auto Calibration, the muting

function will shut off automatically.



It may not be possible to take the correct

measurements or to perform Auto Calibration at

all if special speakers such as dipole speakers are

used.



If the measurement fails, follow the message,

then select [Retry]. For details on the error code

and warning message, see "List of messages

after Auto Calibration measurements" (page 55).

To cancel Auto Calibration

The Auto Calibration function will be canceled

when you perform the following during the

measurement process:

 Press  (power).

 Press the input buttons on the remote

control or turn the INPUT SELECTOR on the

receiver.

 Press  (muting), MUSIC or AMP MENU.

 Press SPEAKERS on the receiver.

 Change the volume level.

 Connect the headphones.

Calibration microphone

(supplied)