6 ] Removing The Head Assy - Brother PT-1090 Service Manual

[ 6 ] Removing the Head ASSY

(1) Remove the adhesive tape from the bottom cover.
(2) Remove the nut 3 M3, the washer and the one screw, and remove the head
ASSY from the bottom cover.
CAUTION: Before handling the head ASSY, take care not to touch it directly by
Head ASSY
Bottom cover
hand. The head ASSY may be damaged due to the static electricity
charged in your body.
Screw
Figure 3.1-10 Removing the Head ASSY
III - 10
Adhesive tape
Washer
Nut 3 M3