9 ] Removing The Ribbon Drive Cam, The Ribbon Drive Gear And The Ribbon Clutch Spring - Brother PT-1090 Service Manual

[ 9 ] Removing the Ribbon Drive Cam, the Ribbon Drive Gear and the Ribbon Clutch Spring

(1) Turn the bottom cover upside down.
(2) Remove the one screw, and remove the ribbon drive cam and the ribbon drive
gear from the bottom cover.
(3) Remove the ribbon clutch spring from the ribbon drive cam.
Screw
Ribbon drive cam
Ribbon clutch spring
Ribbon drive gear
Bottom cover
Figure 3.1-13 Removing the Ribbon Drive Cam, the Ribbon Drive Gear and the Ribbon Clutch Spring
III - 13