8 ] Installing The Roller Holder Release Spring, The Roller Holder Assy; The Cutter Lever Spring And The Cutter Lever - Brother PT-1090 Service Manual

[ 8 ] Installing the Roller Holder Release Spring, the Roller Holder ASSY,

the Cutter Lever Spring and the Cutter Lever

(1) Insert the end "a" of the roller holder release spring into the guide groove of the
roller holder ASSY and set it.
(2) Insert the roller holder ASSY into the shaft of the bottom cover, and hang the end
"b" of the roller holder release spring on the rib of the bottom cover.
(3) Set the cutter release spring to the cutter lever, and hang the end "c" of the cutter
release spring on the rib of the cutter lever.
(4) Set the cutter lever to the bottom cover, and hang the end "d" of the cutter release
spring on the rib of the bottom cover.
Cutter lever spring
Cutter lever
Bottom cover
Rib
End "d"
Figure 3.1-27 Installing the Roller Holder Release Spring, the Roller Holder ASSY,
the Cutter Lever Spring and the Cutter Lever
Roller holder ASSY
End "a"
Guide
Groove
Rib
Shaft
Rib
Cutter lever
End "c"
Cutter lever spring
III - 27
End "b"
Roller holder release spring
Guide Groove
Bottom cover
End "a"