10. DISASSEMBLY AND ASSEMBLY
10-1. Disassembly Procedure
To remove the Roll Paper Holder
1. Loosen the screws to open the PC card cover.
2. Open the roll paper holder.
Slide the lock levers on both sides to the position "FREE".
1
Release the hooks on both sides and lift the drip-proof
2
cover.
Open the roll paper holder.
3
3. Remove two screws on both sides of the PC card slot re-
spectively.
2x6, Black
1
2x8, Silver
2
To separate the upper case and the lower case
1. Slide the battery cover lock switch to the position "FREE" to open the battery cover.
– 74 –
2
1
2
3
1