Table of Contents
Advertisement
Figure 46 Installing the PSU backplane
To remove the power supply:
1.
Disconnect the power cable from the power supply.
2.
Press the port colored button on the power supply latch.
3.
Slide the power supply out of the power supply bay.
Figure 47 Removing the power supply
To replace the power supply:
1.
Align the power supply edge card connector with the open slot of power supply cage.
2.
Slide the power supply into the power supply bay until it snaps into place.
3.
Reinstall the power cable to the power supply.
Removal and replacement procedures 59
Advertisement
Table of Contents
