Installing The Display Assembly - Dell Latitude 5420 Owner's Manual

Back to Contents Page
Dell Latitude 5420/E5420/E5420m
Owner's Manual

Installing the Display Assembly

1. Attach the display assembly to the base of the computer.
2. Tighten the screws to secure the display assembly.
3. Connect the low-voltage differential (LVDS) cable to the system board.
4. Connect the camera cable to the system board connector.
5. Push the antenna cables through the opening of the bottom of the
computer.
6. Secure the antenna cables to the routing channels.
7. Connect the antenna cables to the WLAN/WLAN cards.
8. Replace the
9. Replace the
10. Replace the keyboard.
11. Replace the
12. Replace the
13. Replace the
14. Replace the
15. Replace the
16. Follow the procedures in
Related tasks
Removing the Display Assembly
palm rest.
CPU door.
keyboard trim.
hard drive.
optical drive.
back panel.
battery.
After Working Inside Your Computer.