Installing The Palm Rest - Dell Latitude 5420 Owner's Manual

Back to Contents Page
Dell Latitude 5420/E5420/E5420m
Owner's Manual

Installing the Palm Rest

1. From the left edge of the palm rest, press the palm rest downwards on all
the edges on the computer.
2. Press down on all edges to ensure that the tabs are engaged.
3. Connect the following cables to the system board:
power button cable
fingerprint cable
touchpad cable
4. Tighten the screws to secure the palm rest.
5. Flip the computer over and tighten the screws to secure the palm rest.
6. Replace the
7. Replace the keyboard.
8. Replace the
9. Replace the
10. Replace the
11. Replace the
12. Follow the procedures in
Related tasks
Removing the Palm Rest
CPU door.
keyboard trim.
optical drive.
back panel.
battery.
After Working Inside Your Computer.