ERS 10 - An excellent choice 2 The heating installation – the heart of the house Ventilation heat exchange function Maintenance of ERS 10 3 Disturbances in comfort Manage alarm Troubleshooting 4 Technical data 5 Glossary Table of Contents | NIBE™ ERS 10-500...
Serial number must always be given It is hereby certified that the installation has been carried out in accordance with the instructions in the Installer manual and applicable regulations. Date __________________ Signed _________________________ Chapter 1 | Important information NIBE™ ERS 10-500...
This symbol indicates tips on how to facilitate using the product. Marking The CE marking means that NIBE ensures that the product meets all regu- lations that are placed on it based on relevant EU directives. The CE mark is obligatory for most products sold in the EU, regardless where they are made.
Serial number The serial number can be found at the top right inside the front hatch. Serial number Caution Always give the product's serial number when reporting a fault. Chapter 1 | Important information NIBE™ ERS 10-500...
NIBE Energy Systems France Sarl, Zone industrielle RD 28, Rue du Pou du Ciel, 01600 Reyrieux Tel : 04 74 00 92 92 Fax : 04 74 00 42 00 E-mail: info@nibe.fr www.nibe.fr NIBE Energy Systems Ltd, 3C Broom Business Park, Bridge Way, Chesterfield S41 9QG Tel: 0845 095 1200 Fax: 0845 095 1201 E-mail: info@nibe.co.uk...
Page 8
NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 Markaryd Tel: +46-(0)433-73 000 Fax: +46-(0)433-73 190 E-mail: info@nibe.se www.nibe.se For countries not mention in this list, please contact Nibe Sweden or check www.nibe.eu for more information. Chapter 1 | Important information...
The ventilation heat exchanger has a very low noise level. ■ Easy to install The ventilation heat exchanger is easy to install together with a NIBE heat pump or indoor module. During installation, the ventilation heat exchanger is connected to the main product, which enables you to read off the exhaust air module's values from the main product's display.
Extract air Avluft 4 °C 20 °C Room air Outdoor air The temperatures are only examples and may vary between different installations and time of year. Chapter 2 | The heating installation – the heart of the NIBE™ ERS 10-500 house...
In the ventilation heat exchanger the air releases the heating energy and the temperature is raised. A fan blows the heated air into those rooms that have supply air inlets. Chapter 2 | The heating installation – the heart of the NIBE™ ERS 10-500 house...
1. Switch off the installation using the MCB in the fuse box or the main switch for the installation. 2. Remove the front hatch by lifting it slightly and then pulling it towards you. Chapter 2 | The heating installation – the heart of the NIBE™ ERS 10-500 house...
Page 13
Exhaust air filter: G4 = Standard filter (Coarse filter class G4) NOTE Use of a vacuum cleaner or compressed air on the filter is not recommen- ded, as this diminishes the degree of filtration. Chapter 2 | The heating installation – the heart of the NIBE™ ERS 10-500 house...
Page 14
Cleaning the heat exchanger The heat exchanger in ERS 10 must be inspected at regular intervals. Every other year is recommended. Contact your installer for assistance with cleaning. Chapter 2 | The heating installation – the heart of the NIBE™ ERS 10-500 house...
Selecting "aid mode” is not the same as correcting the problem that caused the alarm. The status lamp will therefore continue to be red. If the alarm does not reset, contact your installer for suitable remedial ac- tion. Chapter 3 | Disturbances in comfort NIBE™ ERS 10-500...
Page 16
NOTE Always state the heat pump's and ventilation heat exchanger's serial numbers when contacting your installer. Chapter 3 | Disturbances in comfort NIBE™ ERS 10-500...
High or distracting ventilation ■ Filter blocked. Clean or replace filter (see page 12). – The ventilation is not adjusted. ■ – Order ventilation adjustment. Closed, too much choke or blocked ventilation device. ■ Chapter 3 | Disturbances in comfort NIBE™ ERS 10-500...
Page 18
Enter the main product's menu 1.2 and select "normal". – ■ External switch for changing the fan speed activated. Check any external switches. – Silencers not correctly installed. ■ – Contact your installer! Chapter 3 | Disturbances in comfort NIBE™ ERS 10-500...
4 Technical data Detailed technical specifications for this product can be found in the in- stallation manual (www.nibe.eu). Chapter 4 | Technical data NIBE™ ERS 10-500...
The heated air that is blown from ERS 10 and out into the room. Supply air device Valves, usually in the ceiling, where the heated supply air is blown out and aids in heating up the accommodation. Chapter 5 | Glossary NIBE™ ERS 10-500...
Need help?
Do you have a question about the ERS 10-500 and is the answer not in the manual?
Questions and answers