Yamaha Rhino 450 YXR45FAV Service Manual page 335

FRONT ARMS AND FRONT SHOCK ABSORBERS
Ball joint remover/installer set
P/N. 90890-01474
Ball joint adapter set
P/N. YM-01474
Ball joint remover/installer attach-
ment set
P/N. YM-01477
3
Body
4 Long bolt
5
Remover washer
6
Remover spacer
Installer
7
attachment
8 Installer spacer
9 Installer guide
c. Install the body 3, long bolt 4, and
remover washer 5 onto ball joint.
NOTE:
Remover washer 5 must be aligned with the
projection on the head of the ball joint.
d. Hold the body 3 in place while turning in
the long bolt 4 to remove the ball joint 0
from the front upper arm.
e. Remove the ball joint remover/installer.
f. Install the long bolt 4, installer spacer 8
and installer guide 9 onto the body 3.
g. Attach the assembled ball joint remover/
installer, new ball joint A and installer
attachment 7 to the front upper arm B.
NOTE:
Do not tap or damage the top of the ball joint.
h. Hold the body 3 in place while turning in
the long bolt 4 to install the new ball joint
A into the front upper arm B.
i. Remove the ball joint remover/installer.
8 - 59
CHAS
YM-01474
90890-01474
YM-01474
90890-01474
YM-01477
YM-01477
YM-01477
YM-01477
YM-01477