Yamaha Rhino 450 YXR45FAV Service Manual page 315

a
1
b
d
a
c
2
a
1
FRONT AND REAR BRAKES
4. Install:
1
M
NOTE:
Apply lithium-soap-based grease to the park-
ing brake arm shaft and set bolt.
a. Screw in the parking brake arm shaft coun-
3
NOTE:
4
The hole for the parking brake arm shaft has
multiple threads. If the punch mark a on the
parking brake arm shaft is not between the
alignment marks b when the parking brake
arm shaft is screwed in completely, remove
the parking brake arm shaft and screw it in
from a different starting position.
b. Turn the parking brake arm shaft approxi-
c. Install the parking brake arm to the parking
d. Turn the parking brake arm until it contacts
e. Finger tighten the set bolt.
f. Tighten the parking brake arm nut.
L
5. Install:
NOTE:
Align the projection a on the piston side of the
brake pad with the groove in the brake caliper
piston.
8 - 39
• parking brake arm shaft 1
• parking brake arm 2
• set bolt 3
• parking brake arm nut 4
MMM M MMM M M MMM M M MMM M
terclockwise completely so that the punch
mark a on the parking brake arm shaft is
between the alignment marks b.
mately 60° clockwise.
brake arm shaft so that the punch mark c
on the parking brake arm is aligned with the
punch mark a on the parking brake arm
shaft.
the pin d.
Parking brake arm nut
9 Nm (0.9 m · kg, 6.5 ft · lb)
LLL L LLL L L LLL L L LLL L
• brake pad (piston side) 1
(with insulator and pad shim)
CHAS
M MMM M M MMM M MMM
L LLL L L LLL L LLL