TH-50PF10UK
8.13. Removal of H3-Board (L, R)
1. Remove 2 screws and then remove the Speaker Terminal
Block (L, R).
2. Disconnect the connector (H37).
3. Remove 3 screws (J) and then remove the H3-Board.
8.14. Removal of Fan
1. Disconnect the Fan Relay Connectors.
2. Remove 14 screws and then remove the 4 Fan Blocks (A)
(B) (C) (D).
3. Remove 2 screws (L) and then remove the Fans (A) (B).
4. Remove 4 screws (K) and then remove the Fans (C) (D).
5. Reassemble the Fans in reverse order.
6. Stick the Cushion (Fan) around the Fan.
Note:
The Cushion of Fan is not re-usable.
Please use a new one when Fan exchange.
24