28. Remove the flexible cables from the connectors (C11,
C21, C22, C31, C41, C51, C52, C61).
29. Remove 2 ( ) screws and then remove the S1-Board
Block.
30. Remove 3 ( ) screws and then remove the AC-Inlet
Block.
31. Remove 8 screws of the Cabinet.
32. Remove the 13 Spacers and Spacer Rings from the
Plasma Panel.
Caution:
• Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
33. Lift up the bottom of the Plasma Panel in the direction of
the arrow 1 and pull the Plasma Panel in the direction of
the arrow 2 and then remove the Plasma Panel.
31
TH-50PF10UK