2
3
4
Checking that your network is available
Check that the amber LED is glowing and the network
symbol
the network symbol is shown whenever your radio has
access to the MPT trunked network.
If the amber LED and the network symbol are flashing, your
radio is attempting to access the MPT trunked network. If
these indicators remain flashing, your radio may be out of
the network coverage area.
Changing your network
Your radio may be programmed to operate in up to four
completely separate trunking networks. You may wish to
change networks because you are out of the network cover-
age area, or you need to have access to another trunking
network. To change your radio's operating network, you may
be able to either:
In the Change Mode menu,
select either Conventional
or MPT.
Press Select.
Press Yes when you are
prompted to confirm
your selection.
The message Changing Mode
appears and your radio now
shows the programmed default
display for either conventional or MPT trunked mode.
appears in the display. The amber LED glows and
use the Main menu, or
dial the new network using a keypad microphone.
Operating in MPT trunked mode 43