Reduces Power Consumption - Panasonic TH-50VX100E Operating Instructions Manual

Reduces power consumption

1
Display the menu screen.
2
Select "Setup".
Picture
Setup
Pos. /Size
Sound
3
Select the item and set.
Signal
Screensaver
Component/RGB-in select
External scaler mode
Power save
Standby save
Power management
Auto power off
OSD design
OSD position
OSD Language
4
Exit the menu.
● Power save
● Standby save
● Power management
● Auto power off
36
RGB
Off
Off
On
Off
Off
Type1
Upper left
English (UK)
When this function is turned On, luminous level of the Plasma Display is
suppressed, so power consumption is reduced.
When this function is turned On, power consumption of the microcomputer is
reduced during power supply standby (see page 12, 14, 15), so standby power of
the set is reduced.
When this function is set to On, it operates under the following conditions to turn
the power on or off automatically.
When no pictures (HD/VD sync signals) are detected for 30 or so seconds during
PC IN signal input:
→ Power is turned off (standby); the power indicator lights up orange.
When pictures (HD/VD sync signals) are subsequently detected:
→ Power is turned on; the power indicator lights up green.
Notes:
• This function operates only during PC IN signal input.
• This function is effective when "Sync" is set to "Auto" and "Component / RGB-in
select" is set to "RGB".
Equipment power supply is turned Off when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the
input signals stop.
Note:
This function is effective for input signals except PC IN terminal.
OK
2
select
1
change
2
select
1
or
Signal
Screensaver
Component/RGB-in select
RGB
External scaler mode Off
Power save Off
Standby save On
Power management Off
Auto power off Off
OSD design Type1
OSD position Upper left
OSD Language English (UK)