Basic Controls
Scrolling bar and Test patterns functions
Pressing
activates one of the following two functions. The function button setting can be configured by
accessing "Function button assign" in the Options menu. (see page 41)
Scrolling bar
Press
Scrolling bar
Scrolling bar
Yes
No
Activates the Scrolling bar only screensaver. After 15
minutes, the display enters standby mode.
Scrolling bar only
To exit this mode, press any button.
Note:
Auto power off is deactivated during Scrolling bar or Test patterns operation. (see page 36)
EXT. SCALER function
Each time you press
External scaler mode
On
Off: Use the built-in scaler.
On: Use an external scaler.
The setting is valid with the following signals.
1125 (1080) / 24p•25p•30p•50p•60p
With input signals other than these, specifying "On" will display the following message.
Input signal must be 1125p(1080p)
External scaler mode
On
Note:
You can also turn the built-in scaler On and Off by accessing "External scaler mode" in the Setup menu. (see page
35)
16
Press to
select
"Yes".
Press.
, an external scaler is activated or deactivated.
Test patterns
Press
Test patterns
Test patterns
Yes
No
Each time you press
displayed (seven in all).
Colour Bars
Black
1% window
To exit this mode, press any button other than
Press to
select
"Yes".
Press.
a different test pattern is
Red
Green
Frame
Blue
(2 lines × 2 dots)
.