Table of Contents
Advertisement
Power On / Off
Connecting the AC cord plug to the Plasma
Display.
Fix the AC cord plug securely to the Plasma
Display with the clamper. (see page 8)
Connecting the plug to the Wall Outlet.
Notes:
•
Main plug types vary between countries. The
power plug shown at right may, therefore, not be
the type fitted to your set.
•
When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet first.
Press the Power switch on the Plasma Display to
turn the set on: Power-On.
Power Indicator: Green
When first switching on the unit
Following screen will be displayed when the unit is
turned on for the first time.
Select the language with the remote control.
Unit buttons are invalid.
Select the language.
1
Set.
2
Notes:
•
Once the language is set, the screen won't be displayed when switching on the unit next time.
•
From the second time on, language selection can be done from the Setup menu. (see page 13)
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Plasma Display off by pressing the
the Plasma Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns orange
in the power off state.
12
button on the remote control to turn the Plasma Display off.
button on the remote control to turn the Plasma Display on.
INPUT
MENU
OK
INPUT
OSD Language
English (UK)
Deutsch
Français
Italiano
Español
ENGLISH (US)
switch on the unit, when
Power
Remote Control
Indicator
Sensor
MENU
From the second time
on, the below screen is
displayed for a while (setting
condition is an example).
PC
16: 9
HDMI
Advertisement
Table of Contents
