Reduces Power Consumption; Customizing The Input Labels - Panasonic TH-42PG10M Operating Instructions Manual

Reduces power consumption

• Power save:
• Standby save:
• Power management: The unit power supply is turned On or Off depending on whether or not there is a signal
• Auto power off:
1
2
3

Customizing the Input labels

This function can change the label of the Input signal to be displayed.
Select the input signal which you would like to change its label before customizing the Input labels. (see page 13, 14)
Note:
While selecting an Input signal through Optional Terminal Board connected to Slot1, Slot2 and Slot3, the Input label
will depend on each Optional Terminal Board.
Input labels for Slot1, Slot2, Slot3 and Mini D-sub:
[Slot1 Input] INPUT1 / VIDEO1 / COMPONENT1 / RGB1 / DIGITAL1 / PC1 / DVD1 / CATV1 / VCR1 / STB1
[Slot2 Input] INPUT2 / VIDEO2 / COMPONENT2 / RGB2 / DIGITAL2 / PC2 / DVD2 / CATV2 / VCR2 / STB2
[Slot3 Input] INPUT3 / VIDEO3 / COMPONENT3 / RGB3 / PC3 / DVD3 / CATV3 / VCR3 / STB3
[PC (Mini D-sub) input] PC / COMPONENT / RGB / DVD / STB
When BNC Dual Video Terminal Board (TY-FB9BD) is used, an "A" or "B" is added at the end of each input label,
depending on the input selected (see below).
Addition sign
Selected Input
32
When this function is turned On, luminous level of the Plasma Display is suppressed, so
power consumption is reduced.
When this function is turned On, power consumption of the microcomputer is reduced
during power supply standby (see page 12, 14-15), so standby power of the set is reduced.
during PC input mode.
This function is enabled when it is turned On. (Only during input from PC (Mini D-sub) terminal)
Equipment power supply is turned Off when there is no signal.
When this is set to On, the power supply of the unit goes Off 10 minutes after the input
signals stop.
This function is effective for input signals except input from PC (Mini D-sub) terminal.
Press to select
"Power save"
"Standby save"
"Power management"
"Auto power off".
Press to select "On" or "Off".
On Off
Press to exit from Setup.
Press to select Input label.
Press to change the Input label.
"A"
Composite
Component/RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
Note:
"Power management" and "Auto power off" are effective
during normal viewing (one picture screen) only.
Component/RGB-in select
Input label
Power save
Standby save
Power management
Auto power off
OSD Language
"B"
S VIDEO
Setup
Signal
RGB
PC
Off
Off
Off
Off
English ( UK )
Setup
Signal
RGB
PC
Off
On
Off
Off
English ( UK )
1/2
1/2